The Premium 2.0 opens the 2026 generation of ÜLKA tabletop collectors. Its airflow reaches 4.4 m/s and its grille has been entirely redrawn to intercept particles as they leave the file.
Housing brought down to 10.6 cm, draw held at 48 W, HEPA filtration and five years of cover handled by ÜLKA France.
Since its launch, the Premium has been the best-selling tabletop unit in the ÜLKA nail dust collectors catalogue. Reworking it was therefore a delicate exercise: improve what needed improving without undoing what already worked. The Premium 2.0 is the result of that revision, and it comes down to one idea: reach the dust faster.
Airflow rises from 3 to 4.4 metres per second. The grille has been redrawn. The housing has lost height. And all of it while drawing four watts less than before.
Rather than a speech, a measurement. Point by point, here is the gap between the two:
| Criterion | Premium | Premium 2.0 | Difference |
|---|---|---|---|
| Airflow | 3 m/s | 4.4 m/s | + 47 % |
| Power drawn | 52 W | 48 W | - 4 W |
| Housing height | 11 cm | 10.6 cm | - 0.4 cm |
| Footprint | 26.5 × 24.5 cm | 26.7 × 26.7 cm | square format |
| Mass | 2.15 kg | 2 kg | - 150 g |
| Noise level | 55 dB | 69 dB | more audible |
| Warranty | 5 years | 5 years | unchanged |
One line of that table goes the wrong way, and we would rather write it here than let you discover it on delivery: the 2.0 makes itself heard more. We come back to that below, in detail.
ÜLKA uses the name Human Engineering for a design method that is simple to state: watch how a nail technician actually works first, draw afterwards. Not the other way round.
Three observations shaped this model. Dust is born on a band two or three centimetres wide, at the edge of the nail, not across the whole hand. The client moves her hand constantly; she never holds it still in the middle of a grille. And a nail station worktop is already saturated long before you add a device to it.
From those come the geometry of the new grille, the speed of the airflow and the compact square format. Each of those decisions answers one of the three constraints.
On the previous generation, the grille simply let air through. On the 2.0 it steers it. Its pattern channels suction toward the band where filings form, across a widened capture area.
The benefit is measured in tolerance rather than raw power. You no longer have to pull your client's hand back to the centre of the unit every couple of minutes for suction to stay effective: the useful zone now covers the natural range of the gesture.
The height of a tabletop collector is rarely advertised. It should be. Every extra centimetre forces the client to lift her wrist a little higher, and that posture does not survive ninety minutes intact.
Brought down to 10.6 cm, the Premium 2.0 housing leaves the hand in an almost natural position. It moves less, so your work gains precision. Its 2 kg on a 26.7 × 26.7 cm footprint also give it a base that will not slide back when you press down.
To remove the step between table and grille entirely, pair it with one of the magnetic armrests for the tabletop Premium: the hand then rests at exactly the height of the suction zone.
It would be easy to assume a stronger unit consumes more. The Premium 2.0 does the opposite: it comes down to 48 W where its predecessor asked for 52, while producing a markedly faster airflow.
A gap like that is not obtained by fitting a bigger motor but by reworking the path air takes inside the housing. Incidentally, it also means an electricity bill that does not climb and a unit that runs cooler through a long day.
The Premium 2.0 runs at 69 dB. The first generation was measured at 55 dB. The gap is real and you will hear it.
There is a reason for it: moving air at 4.4 m/s mechanically creates more turbulence than at 3 m/s. That is the price of capture, and no manufacturer escapes it. What matters is what it means for you.
At 69 dB, conversation with your client remains possible without shouting, but you will carry your voice more than with the previous model. If your room is small, if you work long sessions, or if calm is part of what you sell, the first-generation Premium is still available among our ÜLKA nail dust collectors and remains the sounder choice. If your priority is to let nothing escape, the 2.0 was made for you.
A dust collector never works alone. Three items in the ÜLKA catalogue pair naturally with it:
| Device type | Tabletop nail dust collector |
| Power | 48 W |
| Maximum airflow | 4.4 m/s |
| Measured noise level | 69 dB |
| Supply | 220 V / 50 Hz — 110 V compatible |
| Filtration | HEPA cartridge |
| Grille | New pattern, wide capture area |
| Mass | 2 kg |
| Footprint | 26.7 × 26.7 × 10.6 cm |
| Model year | 2026 |
| Cover | 5 years |
The working life of a nail dust collector is decided almost entirely by the filter. Here is the routine, in order:
Wear parts are gathered in our ÜLKA consumables. As the Premium 2.0 carries a newly drawn grille, write to us before ordering a replacement filter or grille: we will confirm the reference matched to your unit.
No, and that is deliberate. Both models stay in the catalogue because they answer different priorities. The 2.0 was built for capture: its airflow gains almost half again. The first generation keeps the advantage of quiet, at 55 dB against 69. Choose by what matters most in your room.
Margin. A fast airflow keeps drawing particles in even when the hand moves a few centimetres away from the grille — which happens constantly as soon as you turn a finger or change angle. A slow unit captures properly only in a narrow zone, and everything outside it lands on the table.
That is the use case that demands it most. A professional ÜLKA e-file throws material continuously and at speed, right at the nail. Without fast capture, that dust spreads across the whole working area before it can be drawn in.
They tell you about electrical consumption, not effectiveness. The Premium 2.0 proves it: it draws four watts less than the previous generation while producing a markedly faster airflow. What makes the difference is turbine design, grille geometry and the area offered to suction.
Over a ninety-minute appointment, yes. Every centimetre of height makes the client raise her wrist a little more. A supported wrist stays steady; a suspended one moves. And when the hand moves, your line loses its edge.
26.7 × 26.7 cm, a square roughly the size of a folded A4 sheet. The square format, new to this generation, sits against a table edge better than the old rectangle.
That is what it is sized for. Its 48 W are intended for continuous salon operation, without heat build-up or the gradual drop in airflow that shows up late in the day.
It holds the particles the airflow has captured. Without it, the unit would simply move dust from one part of the room to another. It is the wear part of the system, and the only one the lifespan of the whole really depends on.
A daily dry dusting at the end of the day, and replacement roughly every three months. If you see eight clients a day, shorten that; if you work part time, it stretches naturally. Our ÜLKA consumables gather the spare parts.
Never. Water spreads the fibres of the filtering media irreversibly: the filter then lets through the finest particles, exactly the ones that matter. Soft brush or air blower, nothing else.
Yes, and those are the services where it earns its place most. Removal, infills, shaping extensions: any operation that produces filings falls within its remit.
It accepts 220 V / 50 Hz and 110 V, which covers most domestic supplies.
Five years, a span few manufacturers offer on equipment of this kind. Service is handled by ÜLKA France, with spare parts held in the catalogue: you have no claim to open abroad.
ulka.fr is the brand's official site in France. Buying here means a contact who answers in your language, spare parts held locally and a five-year warranty exercised without an intermediary.
To place the Premium 2.0 among the other models, browse the whole of our ÜLKA nail dust collectors.
The Premium 2.0 opens the 2026 generation of ÜLKA tabletop collectors. Its airflow reaches 4.4 m/s and its grille has been entirely redrawn to intercept particles as they leave the file.
Housing brought down to 10.6 cm, draw held at 48 W, HEPA filtration and five years of cover handled by ÜLKA France.
ÜLKA is the essential reference for nail dust collectors. Specially designed for nail professionals and beauty salons, our dust extractors ensure a healthier work environment by effectively capturing fine particles generated during nail filing and sanding.
Recognized for the quality and reliability of its equipment, the ÜLKA brand offers robust devices designed for intensive use with a lifespan of up to 50,000 hours. Our products are European certified, ensuring safety and performance for nail technicians, beauticians, and beauty technicians.
