Enhance the protection of your manicure dust collector with ÜLKA pre-cut filter sheets, manufactured from soft, absorbent and durable non-woven material. They help reduce the build-up of particles released when filing UV/LED gel, builder gel or semi-permanent nail polish. The 20 × 20 cm size is mainly intended for ÜLKA Nano and Tornado models, while the 30 × 25 cm size is primarily suitable for Premium and Aero dust collectors. Antistatic and ready to use, these sheets support easy maintenance of the main filter and help keep professional nail workstations clean.
Make daily equipment care easier with the roll of pre-cut ÜLKA pre-filter sheets, a practical solution designed to reduce direct filing dust deposits on the main filter of your nail dust collector. Each protective sheet is positioned above the original filtration system to collect some of the particles produced during manicure, pedicure, shaping and product removal services.
Made from a soft and flexible non-woven material, the ÜLKA protective sheets are easy to install and remove. Their pre-cut roll format means that each sheet can be separated without measuring or trimming the material. This convenient design helps streamline workstation preparation for nail technicians, nail artists, beauty professionals and manicure enthusiasts working at home.
Two sizes are available for the main dust collector models produced by the brand. The 20 x 20 cm size is mainly suitable for the ÜLKA Nano and ÜLKA Tornado. The larger 30 x 25 cm size is mainly intended for the ÜLKA Premium and ÜLKA Aero. Always check the exact model of your machine before selecting a size.
Filing professional nail products generates a significant amount of fine residue. During the removal of UV or LED gel, acrylic, acrygel, polygel or gel polish, the extracted particles are directed towards the main filter. Over several services, this dust may build up quickly and make regular maintenance more time-consuming.
The ÜLKA pre-filter for nail dust collectors creates an intermediate layer between the working area and the original filter. Some of the collected particles remain on the removable sheet instead of settling immediately on the main filtration surface. At the end of the service, the sheet can be lifted out carefully and replaced once it becomes loaded with dust.
The pre-filter sheet must never be used instead of the original filter. It provides additional protection but does not remove the need to inspect, clean or replace the main filtration system according to the recommendations for your ÜLKA model.
The pre-cut design makes installation particularly simple. Separate one sheet from the roll, place it over the main filter and close the dust collector grille. No scissors or measuring tools are required. This is especially useful in a busy professional environment where several clients may be booked throughout the day.
Some of the particles produced during filing remain on the surface of the pre-filter. After the service, the sheet can be lifted slowly and folded inwards to contain the collected residue. This reduces direct handling of the main filter and helps prevent loose dust from spreading around the manicure station.
The roll can be stored with the everyday consumables used to prepare and clean the workstation. Because the sheets are ready to use, they can be included easily in a regular reset routine between appointments. They are suitable for professional salons, beauty rooms, mobile nail technicians and home manicure areas.
Choosing the correct dimensions helps cover the filtration surface without creating folds or unnecessary excess material. The 20 x 20 cm ÜLKA pre-filter is mainly suitable for the Nano and Tornado. The 30 x 25 cm ÜLKA pre-filter is mainly intended for the Premium and Aero, which have a larger filtration area.
Pre-cut ÜLKA sheets can be used during any treatment that produces filing dust. They are particularly useful for electric file removal, although they may also be installed during hand filing, shaping and lighter correction work.
The small 20 x 20 cm size is mainly designed for the ÜLKA Nano and ÜLKA Tornado. Its compact dimensions cover the useful filtration area without leaving a large amount of excess material around the grille. It is suitable for salon professionals, mobile technicians and home users equipped with a compatible machine.
The large 30 x 25 cm size is mainly suitable for the ÜLKA Premium and ÜLKA Aero. Its larger surface corresponds to the wider filtration systems used in these models. For correct installation, the sheet should be positioned completely flat, without folds or overlapping sections.
The outside dimensions of the dust collector may not be enough to identify the required sheet. Before ordering, check the model name, machine reference and dimensions of the main filter.
Replacement frequency depends on the amount of material being filed. A complete gel or acrylic removal usually creates more dust than a small shape correction or finishing service. The condition of the sheet should therefore be checked visually after each treatment.
In a professional salon, replacing the sheet between clients provides a clean protective surface for the next appointment. It should also be changed when it is heavily coated, no longer remains correctly positioned or appears to reduce the suction performance.
Do not keep using a saturated sheet simply to extend its lifespan. Excessive particle build-up may restrict airflow and reduce working comfort.
The pre-filter must always be used together with the main filter specified by the manufacturer. Do not stack several sheets and do not install folded or crumpled material. The grille must close normally without forcing or trapping the edges of the sheet.
If the dust collector makes an unusual noise, becomes excessively hot or suddenly loses suction, switch it off and inspect the complete filtration system. A fresh protective sheet cannot compensate for a saturated, incorrectly installed or damaged main filter.
The roll of pre-cut ÜLKA pre-filter sheets is a functional accessory for manicure and pedicure services. Easy to install, it collects some of the filing dust and simplifies regular dust collector maintenance. The 20 x 20 cm size is mainly suited to the Nano and Tornado, while the 30 x 25 cm size is mainly intended for the Premium and Aero.
With these ready-to-use sheets, workstation preparation becomes faster and residue removal more convenient. It is a simple solution for protecting essential equipment, maintaining a professional routine and keeping the manicure area clean and pleasant throughout the working day.
Enhance the protection of your manicure dust collector with ÜLKA pre-cut filter sheets, manufactured from soft, absorbent and durable non-woven material. They help reduce the build-up of particles released when filing UV/LED gel, builder gel or semi-permanent nail polish. The 20 × 20 cm size is mainly intended for ÜLKA Nano and Tornado models, while the 30 × 25 cm size is primarily suitable for Premium and Aero dust collectors. Antistatic and ready to use, these sheets support easy maintenance of the main filter and help keep professional nail workstations clean.
ÜLKA is the essential reference for nail dust collectors. Specially designed for nail professionals and beauty salons, our dust extractors ensure a healthier work environment by effectively capturing fine particles generated during nail filing and sanding.
Recognized for the quality and reliability of its equipment, the ÜLKA brand offers robust devices designed for intensive use with a lifespan of up to 50,000 hours. Our products are European certified, ensuring safety and performance for nail technicians, beauticians, and beauty technicians.
